BMW E28, E24, E23 rear subframe bushing removal puller Tool / Installation tool

Description

Subframe Bushing Removal Tool for all of the following chassis:
E28, E24, E23
Used to remove factory bushings from above platforms.  Also doubles as installation tool for OEM M5 bushings, Delrin bushings, or solid aluminum bushings.
Washers are cut from high strength steel.  Bronze oil impregnated
sleeve & thrust
bearings are installed on both sides of the main cup to aid in removal/ or installation.  They also serve to protect the threaded rod from damage as it slides thru it.  Flange nuts are provided to evenly distribute the forces on bronze thrust bearings and to help everything stay as parallel as possible during the process.  A grade 8 lock nut is provided so you can keep the appropriate end from not turning.   Threaded rod is industrial quality B7 grade which is approximately 2.5x stronger than a traditional hardware store threaded rod (120k tensile vs 50k tensile psi)
NEED A WAY TO SAFELY SUPPORT YOUR CAR WHILE DOING THIS JOB? SEE OUR BMW SPECIFIC JACK STAND ADAPTERS IN THE LINKS BELOW
https://www.ebay.com/itm/333512163307
This is our adapter for 1 1/2 - 2 1/2 ton jack stands
https://www.ebay.com/itm/333881087249
This is our adapter for 3-4 ton jack stands (Most common)
https://www.ebay.com/itm/333619330665
This is our adapter for 4-6 ton jack stands
SEARCH "Forsvara Jack" to see all our models available
All adapters are made with pride in the USA from 11ga (1/8") zinc plated steel and 1/2" 6061-T6.