55'' Super Heavy Duty Ditch Bank Flail Mower, FH-AGF140

Description

Verger flail mulchers are Super Heavy Duty Mowers designed with heavy cutting blades that can chop heavy brush including grasses, debris, sticks, vines, branches, and other wooded materials up to 4” in diameter. The mower head is attached to a hydraulic arm allowing you to swing the mulcher beyond your tractors wheels. The head may be pivoted hydraulically up to 90 degrees for hedge or hillside work or down 55 degrees for ditch or bank work. Connect it to our optional 4-way hydraulic control valve with a hydraulic float and the mulcher will follow the contours of the terrain.A flail mower doesn’t throw grass, instead it cuts finely and leaves the cuttings on the ground where it was cut making it an excellent choice for those places where you could cause damage by throwing debris. Highway mowing and park maintenance often use flail mowers because they are less likely to throw objects during cutting.
Key Features:
For Tractors 45 – 85 HP
Comes with 43 oz. Hammer Blades
5” Diameter Rotor Shaft
Multiple Drive Belts Assure Power to the Blades
Under Deck Clump Busters
Standard 3-Pt Category II Hitch Mount Only
Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
PTO Driveline Included Free of Charge
Adjustable Finished Cutting Height (both Rear Roller & Skids)
Balanced Rotor and Shaft to Reduce Vibration & Reduce Bearing Wear
Powder Coat Paint Finish
Specifications:
Spec
FH-AGF140
Working Width
55”
Total Width
72.5”
Required HP
45 – 85 HP
Min Weight of Tractor & Loader
5000 lbs
Hitch
Cat II Only
Gear Box Rating
85 HP
Pivot Offset
68” Right
Vertical Offset
145 Degrees
Angle UP
90 Degrees
Angle Down
55 Degrees
Std Hammer Blades
12 Blades
Housing Thickness
5mm
Side Plate Thickness
5/16”
Rotor Dia.
5 7/8”
Rotor Shaft Dia.
5”
Blade Swing
15”
No. of Belts
3
3pt Cat-II Conn. Width
30 1/2” – 41 1/2”
Driveline Type
Series 5 Quick Connect, Shear Bolt
Weight
1318 lbs
Crated Weight
1363 lbs
Details:
Overall Width:
The AGF 140 has a overall width of 72.5″.
Cutting Width:
The AGF 140 has a tilling width of 55″.
Weight:
The AGF 140 has a weight 1318 lbs.
HP Requirements at PTO:
The AGF 140 requires 45 – 85 PTO horsepower.
Cutting Height:
The AGF series has a 0″ – 6″ Adjustable to meet various height requirements
Housing Material Thickness:
The AGF series has a housing of 5mm thick.
Side Plate Thickness:
The AGF series has a side plate thickness of 5/16″.
Blade Type:
The AGF series uses heavy duty hammer blade. Each hammer blade weighs 2lbs 12 oz made of cast steel (cast steel is much more durable than cast iron).  Use the hammer blades for clearing saplings (4″ diameter or less) and for grasses.
Number of Blades:
The AGF 140 uses 12 hammer blades.
Precision Blade Overlap:
On the AGF series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.
Rotor Rotation – Reverse:
The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.
Rotor Tube Diameter:
5″ – Heavy duty steel tubing for long life.
Balanced Rotor Tube:
The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.
Hitch Type:
Category 2 standard 3-point.
Pivot Offset From Center Mount:
This feature allows for offset from center to the right of the tractor. This feature is helpful for mowing around fences, buildings; walkways etc. From the center of the PTO the mower extends 68″.
Hydraulic Offset:
The hydraulic cylinder permits the carrier frame to be moved under your command. This permits you to control the cutting position of the mower. Designed so that you can get around rows, trees, fence line, or whatever else is in your path. This is connected to a Remote Hydraulic designed to power the cylinder (also known as 2-way valve) or the rear remote on your tractor design to power the cylinder. Hydraulic Requirements: Hydraulic source must be constant flow for powering Control Valve. We recommend use of Front Loader Style Control Valve with Float Option. Float spool connected to the vertical pivoting cylinder will allow mower to float and naturally follow the ground contour.
Drive Belts:
The AGF series uses 3 belts.
Gearbox Rating:
Up to 85 hp. Heavy duty proven oil bath gearbox for long life.
Driveline / PTO Shaft:
Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
Finish:
Baked on powder coat, powder coat is superior to paint.
Warranty: 90 day
parts warranty with an optional up to 1 year extension.
Support Before and After the Sale:
At Betstco  our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.